Airfix 1/48 Sea Hurricane

General Hobby Chat
User avatar
Stuart Clark
Posts: 122
Joined: Thu Nov 10, 2016 12:06 am
Contact:

Airfix 1/48 Sea Hurricane

Post by Stuart Clark » Sat Oct 07, 2017 4:16 pm

Ordered from Broughdale's
Really looking forward to this kit. Inbox review will be coming.

ImageUntitled by Stuart Clark, on Flickr
Stuart
Blackfire Hobbies and Games
Site - http://blackfire.ca/
Youtube - https://www.youtube.com/channel/UCQ5Qdj ... rBDJvR2r5g

On the bench - Airfix 1/72 TSR2, Hasegawa 1/72 Lancaster

User avatar
Stuart Clark
Posts: 122
Joined: Thu Nov 10, 2016 12:06 am
Contact:

Re: Airfix 1/48 Sea Hurricane

Post by Stuart Clark » Mon Oct 09, 2017 9:21 pm

Here is the promised video inbox review.

https://www.youtube.com/watch?v=1aQbtAa2zX8
Stuart
Blackfire Hobbies and Games
Site - http://blackfire.ca/
Youtube - https://www.youtube.com/channel/UCQ5Qdj ... rBDJvR2r5g

On the bench - Airfix 1/72 TSR2, Hasegawa 1/72 Lancaster

User avatar
Stuart Clark
Posts: 122
Joined: Thu Nov 10, 2016 12:06 am
Contact:

Re: Airfix 1/48 Sea Hurricane

Post by Stuart Clark » Thu Oct 19, 2017 2:15 am

I've started work on the Sea Hurricane. Life has been very busy so I've only had 15-30 min at a time with this kit. However, this has worked out well as the cockpit area consists of quite a few steps where you glue a component on and it's best to wait until it is set completely. So the past few nights have been one step at a time.

I decided to do steps 13-16 first and then put the subframe on the lower wing before building up the cockpit frame. This allows IMHO for easier alignment. The test will be when the fuselage halves go over the assembly later on. :-)

Now that most of the subassembly is done, a coat of Tamiya XF-56 is sprayed on. Quite pleased with the results at this point.

ImageUntitled by Stuart Clark, on Flickr

ImageUntitled by Stuart Clark, on Flickr

Next up with be some brush painting of some other colors in areas and gentle weathering.
Stuart
Blackfire Hobbies and Games
Site - http://blackfire.ca/
Youtube - https://www.youtube.com/channel/UCQ5Qdj ... rBDJvR2r5g

On the bench - Airfix 1/72 TSR2, Hasegawa 1/72 Lancaster

User avatar
Stuart Clark
Posts: 122
Joined: Thu Nov 10, 2016 12:06 am
Contact:

Re: Airfix 1/48 Sea Hurricane

Post by Stuart Clark » Sat Oct 21, 2017 2:35 am

Test fitting the various Yahu cockpit panel bits. They are true works of art.

ImageUntitled by Stuart Clark, on Flickr
Stuart
Blackfire Hobbies and Games
Site - http://blackfire.ca/
Youtube - https://www.youtube.com/channel/UCQ5Qdj ... rBDJvR2r5g

On the bench - Airfix 1/72 TSR2, Hasegawa 1/72 Lancaster

User avatar
Stuart Clark
Posts: 122
Joined: Thu Nov 10, 2016 12:06 am
Contact:

Re: Airfix 1/48 Sea Hurricane

Post by Stuart Clark » Sun Oct 22, 2017 3:56 am

Turning toward the fuselage halves. First up is spraying and detailing the cockpit sidewalls. Since it is now very difficult to get the Gunze Aqueous interior green around here lately, I've switched to the Vallejo Model Air 71010 Interior Green which is a very good match.

ImageUntitled by Stuart Clark, on Flickr

ImageUntitled by Stuart Clark, on Flickr
Stuart
Blackfire Hobbies and Games
Site - http://blackfire.ca/
Youtube - https://www.youtube.com/channel/UCQ5Qdj ... rBDJvR2r5g

On the bench - Airfix 1/72 TSR2, Hasegawa 1/72 Lancaster

User avatar
Stuart Clark
Posts: 122
Joined: Thu Nov 10, 2016 12:06 am
Contact:

Re: Airfix 1/48 Sea Hurricane

Post by Stuart Clark » Sun Oct 22, 2017 6:04 pm

Also starting to look at these great looking paper-based seat belts which I got at UMP

ImageUntitled by Stuart Clark, on Flickr

ImageUntitled by Stuart Clark, on Flickr

ImageUntitled by Stuart Clark, on Flickr
Stuart
Blackfire Hobbies and Games
Site - http://blackfire.ca/
Youtube - https://www.youtube.com/channel/UCQ5Qdj ... rBDJvR2r5g

On the bench - Airfix 1/72 TSR2, Hasegawa 1/72 Lancaster

User avatar
Stuart Clark
Posts: 122
Joined: Thu Nov 10, 2016 12:06 am
Contact:

Re: Airfix 1/48 Sea Hurricane

Post by Stuart Clark » Wed Oct 25, 2017 10:14 pm

Belts installed to the seats, still two buckles to go in this picture but I was getting cross-eyed. These paper-based sets are much easier to work with then photo etch and IMHO look more realistic.

ImageUntitled by Stuart Clark, on Flickr

Also did a quick test fit of the fuselage onto the wings, as other reviewers have noted, the fit is very precise.

ImageUntitled by Stuart Clark, on Flickr
Stuart
Blackfire Hobbies and Games
Site - http://blackfire.ca/
Youtube - https://www.youtube.com/channel/UCQ5Qdj ... rBDJvR2r5g

On the bench - Airfix 1/72 TSR2, Hasegawa 1/72 Lancaster

User avatar
Stuart Clark
Posts: 122
Joined: Thu Nov 10, 2016 12:06 am
Contact:

Re: Airfix 1/48 Sea Hurricane

Post by Stuart Clark » Sun Oct 29, 2017 2:35 am

Got the wings and fuselage together. The fit was very good. There might be some filling required for one small area.

ImageUntitled by Stuart Clark, on Flickr

Fuselage and wings were put together, the fit is very precise but after a few minutes, it got put together. There was some filling required at the wing roots but overall it came together well.

ImageUntitled by Stuart Clark, on Flickr
Stuart
Blackfire Hobbies and Games
Site - http://blackfire.ca/
Youtube - https://www.youtube.com/channel/UCQ5Qdj ... rBDJvR2r5g

On the bench - Airfix 1/72 TSR2, Hasegawa 1/72 Lancaster

Post Reply